Supplies

The Wound Cube by Phokus Research has four realistic wound patterns designed into a semi-transparent cube. The Wound Cube was designed to increase muscle memory for students learning the basics of bleeding control. Their design allows for more effective training in any classroom setting and without any mess.

Features:

• Dry training device - master the basics (no mess)
• Semi-transparent
• 3x Gunshot Wounds - Narrow, Small, Large
• 1x Large Laceration
• Realistic Tissue Loss
• Realistic Tissue Density
• Compact Design (No wasted space)
• Durably built
• Affordable
• Narrow Wound doubles as a Flashlight Channel for increased transparency
• Blood simulant can be used with this product for added realism and can be purchased here.

Luna's TrueClot Wound Packing Task Trainers are an excellent way to provide realistic low-cost and repetitive training in wound packing and the use of advanced hemostatic gauzes (such as QuikClot). The task trainers have very realistic outer anatomy and wound beds with hidden bleed points. Two different wound beds are available: a laceration(stab wound) and a large calibre gunshot wound (GSW). The GSW contains a bony landmark that allows instruction to pack to the bone.

The task trainers are made from sturdy silicone, require no batteries or external power, have no moving parts and can be used over and over again. A reinforced tubing mount prevents pullout of the tubing. A one-way valve ensures that the TrueClot Blood Simulant does not back flow into the 1-litre squeeze bottle during use. TrueClot Blood Simulant will wash easily from the trainer with water even if the blood simulant has dried.

All TrueClot Wound Packing Task Trainers come with:

• A packet of TrueClot Blood Simulant Concentrate
• 10 packs of TrueClot Simulated Hemostatic Gauze
• 1L Blood Squeeze Bottle
• Wound Packing Trainer

The SAM Junctional Tourniquet (SJT) for haemorrhage control is designed to control bleeding where standard tourniquets would not be effective, such as severe wounds to the high upper leg, and time is of the essence. It is compact, easy to use (only four steps), and quick to apply (typically under 25 seconds). The Target Compression Device (TCD) is placed at or near the injury site and pumped up until the bleeding stops. Two TCDs can be used to occlude blood flow bilaterally if needed. The rugged design ensures that the device stays firmly attached to the patient during transport. Designed to exceed MIL-STD-810g requirements.

The Patented SAM® AUTOSTOP buckle acts to ensure all slack is removed prior to TCD inflation. Once optimal compressive force is reached, two prongs activate, clicking to confirm correct application. The buckle is secured in place with its Velcro® system strap

Benefits and Features

• Designed to control bleeding in inguinal or axilla areas
• FDA cleared to stabilize pelvic fractures
• Lightweight (1 lb.,1 oz.) (488g)
• Easy to use (4-step application)
• Quick application (typically under 25 seconds)
• FDA 510(k) cleared and CE mark

*SPECIAL ORDER PRODUCT*
This item is not held in stock at the Tacmed warehouse.
Estimated delivery of this item is normally 2-4 Weeks.
Special Order Products are subject to a re-stocking fee if returned or cancelled. For further information, please call us on 1300 862 633.

The Emergency Tourniquet Trainer is an Australian made silicone wound and bleeding artery simulator used to increase realism and improve tourniquet application.

The simulated above knee amputation (or optional upper arm amputation) provides realistic arterial bleeding from the wound. Bleeding is stopped when the correct tourniquet pressure is applied. The amputated wound end can also be used to demonstrate and practice stump dressing technique.

Features:

• Simulated Leg (or optional Arm) with amputation
• Silicone skin and urethane bone
• Rugged construction for field use
• Packed in a rigid plastic trunk
• Made in Australia

Includes:

• All tubing and fittings required
• 5-litre manual pressure pump
• PVC sheet for table protection
• Bench Clamps

Dimensions:

• 55 x 55 x 31 cm

NOTE: Custom orders or products not in stock are approx 4 weeks lead time. 

*SPECIAL ORDER PRODUCT*
This item is not held in stock at the Tacmed warehouse.
Estimated delivery of this item is normally 5-10 Business Days.
Special Order Products are subject to a re-stocking fee if returned or cancelled. For further information, please call us on 1300 862 633.

Hypothermia treatment is a critical part of first aid when dealing with trauma-induced shock and where the body has insufficient ability to maintain body temperature.

The Blizzard Range of Hypothermia Treatments are renown for superior thermal performance using Reflexcell technology proven with higher tog ratings, yet still compact and lightweight for application and storage.

The Blizzard Heat Casualty blanket combines Reflexcell technology with 4 self-heating pods to physically warm the patient.

The Blizzard Heat Trauma Blanket provides TOG 7 thermal insulation and prevents heat loss in the trauma patient in cases of hemorrhage, inclement weather exposure or immersion in water. The Reflexcell™ material’s cellular network traps warm air, the metalized surface reflects heat back to the patient, and the cord prevents heat from escaping. The large removable heat pads provide exceptional warmth to the upper and lower core. The Blizzard Heat Trauma Blanket is widely used by the US Military for the treatment of trauma patients.

Note - This product is a special order item. Please allow extra time for delivery.

*SPECIAL ORDER PRODUCT*
This item is not held in stock at the Tacmed warehouse.
Estimated delivery of this item is normally 6-8 Weeks.
Special Order Products are subject to a re-stocking fee if returned or cancelled. For further information, please call us on 1300 862 633.

The HydraSim® provides the illusion of external hemorrhage at the point of injury. Those that are trained have the opportunity to see and treat bleeding wounds with hemostatic dressings, pressure dressings, and tourniquets just like they would in a real situation. When coupled with the FEBSS Impact Simulation Trainer® (FIST®) the HydraSim® provides visual bleeding simulation AND the auditory impact simulation associated with the point of wounding during a traumatic event. These simple yet powerful additions increase the realism to any medical training event.

*SPECIAL ORDER PRODUCT*
This item is not held in stock at the Tacmed warehouse.
Estimated delivery of this item is normally 6-8 Weeks.
Special Order Products are subject to a re-stocking fee if returned or cancelled. For further information, please call us on 1300 862 633.

The HydraSim® provides the illusion of external hemorrhage at the point of injury. Those that are trained have the opportunity to see and treat bleeding wounds with hemostatic dressings, pressure dressings, and tourniquets just like they would in a real situation. When coupled with the FEBSS Impact Simulation Trainer® (FIST®) the HydraSim® provides visual bleeding simulation AND the auditory impact simulation associated with the point of wounding during a traumatic event. These simple yet powerful additions increase the realism to any medical training event.

*SPECIAL ORDER PRODUCT*
This item is not held in stock at the Tacmed warehouse.
Estimated delivery of this item is normally 6-8 Weeks.
Special Order Products are subject to a re-stocking fee if returned or cancelled. For further information, please call us on 1300 862 633.

The HydraSim® SP (Single Port) System meets the high demand for ultra-realistic hemorrhage simulation during tactical medical training scenarios while providing a cost effective solution to meet any training budget.  The HydraSim® SP combines the rugged durability of the original HydraSim® with a single, wirelessly operated, hemorrhage simulation output port.  The HydraSim® SP is easy to conceal and is designed to fit in virtually any back pack or underneath clothing.  The HydraSim SP allows the user to create their own simulated injuries and bring new life to old training mannequins and moulage kits.

*SPECIAL ORDER PRODUCT*
This item is not held in stock at the Tacmed warehouse.
Estimated delivery of this item is normally 6-8 Weeks.
Special Order Products are subject to a re-stocking fee if returned or cancelled. For further information, please call us on 1300 862 633.

Skedco’s DropLeg bleeding simulator provides intense wirelessly detonated hemorrhage simulation, yet doubles as a functional DropLeg first aid kit.  The front portion of the simulator allows caregivers to work out of the kit, while the back portion contains Skedco’s patented bleeding simulation technology.  Skedco’s DropLeg bleeding simulator provides one wound with arterial or venous blood flow and nearly 2 liters of blood pumping intensity, all while appearing as a first aid kit.