Supplies

Understanding the need and importance of the form, fit, and function of training devices, the HyFin Chest Seal Trainer provides a cost-effective solution to equip providers with the best training alternative, other than using the actual device, for both vented and occlusive chest seals. Specifically designed to increase user familiarity, the HyFin Chest Seal Trainer utilises the same template as the HyFin Vent Chest Seal Twin Pack but uses a less aggressive adhesive designed for effective chest seal application on both human skin and a training manikin. This allows for training of proper placement of not only the chest seal itself but also of the vent over a simulated wound.

Packaged in the same rugged, compact foil pouch, the HyFin Chest Seal Trainer also features a unique perforated package that allows the student to open only one chest seal if needed. Made in America and 100% latex free, NAR packages each chest seal using its signature Red Tip Technology red tear notches in a rugged, easy-to-open, foil pouch to ensure high-quality performance.

Features:

• Cost effective training solution
• Unique adhesive gel formulation designed not to damage manikins or leave behind excessive adhesive residue
• Designed for optimal training in the same form and function as the HyFin Chest Seal
• Each seal also comes with a gauze pad to wipe the wound surface prior to chest seal application as needed

Luna’s TrueClot® Simulated Hemostatic Gauze works with TrueClot® Blood Simulant to create realistic simulated blood clots during simulation of wound packing for hemorrhage control. The simulated gauze is packaged in a heat-sealed, white plastic pouch and is a close mimic of Z-Medica’s QuikClot® and Combat Gauze® products. Each simulated gauze package contains one 3 inch wide strip of Z-folded  simulated gauze. 4 ft length.

TrueClot® Simulated Hemostatic Gauze is for simulation training only. 

It is not sterile and is not intended for medical use.

Luna's TrueClot Wound Packing Task Trainers are an excellent way to provide realistic low-cost and repetitive training in wound packing and the use of advanced hemostatic gauzes (such as QuikClot). The task trainers have very realistic outer anatomy and wound beds with hidden bleed points. Two different wound beds are available: a laceration(stab wound) and a large calibre gunshot wound (GSW). The GSW contains a bony landmark that allows instruction to pack to the bone.

The task trainers are made from sturdy silicone, require no batteries or external power, have no moving parts and can be used over and over again. A reinforced tubing mount prevents pullout of the tubing. A one-way valve ensures that the TrueClot Blood Simulant does not back flow into the 1-litre squeeze bottle during use. TrueClot Blood Simulant will wash easily from the trainer with water even if the blood simulant has dried.

All TrueClot Wound Packing Task Trainers come with:

• A packet of TrueClot Blood Simulant Concentrate
• 10 packs of TrueClot Simulated Hemostatic Gauze
• 1L Blood Squeeze Bottle
• Wound Packing Trainer

Luna’s TrueClot® Blood Simulant is a highly realistic simulated blood for training first responders in traumatic hemorrhage control, wound packing and the use of advanced hemostatic dressings, TrueClot® Blood Simulant will form realistic simulated blood clots when used together with TrueClot® Simulated Hemostatic Dressings on any task trainer- or manikin-based wound simulator. Simulated clots for moulage or surgical training can be created using TrueClot® Blood Simulant with TrueClot® Clotting Solution.

TrueClot® Blood Simulant comes as a premixed liquid or as a convenient concentrate that is easier to ship and store, but requires mixing in water.

TrueClot® Blood Simulant and Blood Simulant Concentrate are safe and non-hazardous, wash from skin and clothing with soap and water and can be discarded in regular trash. The simulated blood will not clot unless it comes in contact with our Simulated Hemostatic Gauze or Clotting Solution and is stable for 6-12 months if stored at room temperature.

Have you ever spilt fake blood over a conference room floor? Or stained a student's clothes? Well not any more!

Blood Splotches from Drumm Emergency Solutions are a pool of simulated blood handmade from a stretchy, flexible and durable material which adds a level of realism to your medical training.

Features:

• Comes in small ,large and extra large splotches
• Small size is approx 400ml of blood volume in 3 splotches
• Large size comes in 2 splotches - approx 1 x 750 ml and 1 x 250 ml of blood volume
• Extra Large comes in 1 big splotch - approx 1000 ml of blood volume
• Handmade in the US
• Washable
• Non-toxic

Clear Blood is a stainless lubricant designed to add realism while training on the Wound Cube.

Clear Blood dries easily on the cube, no clean up needed. Gauze used with Clear Blood feels dry to the touch.

Features:

• Adds realism while learning the basics
• No mess
• Drys quickly
• No Staining
• 1-2 cc's per Wound Pack is all that's needed

*SPECIAL ORDER PRODUCT*
This item is not held in stock at the Tacmed warehouse.
Estimated delivery of this item is normally 2-4 Weeks.
Special Order Products are subject to a re-stocking fee if returned or cancelled. For further information, please call us on 1300 862 633.

The Emergency Tourniquet Trainer is an Australian made silicone wound and bleeding artery simulator used to increase realism and improve tourniquet application.

The simulated above knee amputation (or optional upper arm amputation) provides realistic arterial bleeding from the wound. Bleeding is stopped when the correct tourniquet pressure is applied. The amputated wound end can also be used to demonstrate and practice stump dressing technique.

Features:

• Simulated Leg (or optional Arm) with amputation
• Silicone skin and urethane bone
• Rugged construction for field use
• Packed in a rigid plastic trunk
• Made in Australia

Includes:

• All tubing and fittings required
• 5-litre manual pressure pump
• PVC sheet for table protection
• Bench Clamps

Dimensions:

• 55 x 55 x 31 cm

NOTE: Custom orders or products not in stock are approx 4 weeks lead time. 

*SPECIAL ORDER PRODUCT*
This item is not held in stock at the Tacmed warehouse.
Estimated delivery of this item is normally 6-8 Weeks.
Special Order Products are subject to a re-stocking fee if returned or cancelled. For further information, please call us on 1300 862 633.

The HydraSim® provides the illusion of external hemorrhage at the point of injury. Those that are trained have the opportunity to see and treat bleeding wounds with hemostatic dressings, pressure dressings, and tourniquets just like they would in a real situation. When coupled with the FEBSS Impact Simulation Trainer® (FIST®) the HydraSim® provides visual bleeding simulation AND the auditory impact simulation associated with the point of wounding during a traumatic event. These simple yet powerful additions increase the realism to any medical training event.

*SPECIAL ORDER PRODUCT*
This item is not held in stock at the Tacmed warehouse.
Estimated delivery of this item is normally 6-8 Weeks.
Special Order Products are subject to a re-stocking fee if returned or cancelled. For further information, please call us on 1300 862 633.

The HydraSim® provides the illusion of external hemorrhage at the point of injury. Those that are trained have the opportunity to see and treat bleeding wounds with hemostatic dressings, pressure dressings, and tourniquets just like they would in a real situation. When coupled with the FEBSS Impact Simulation Trainer® (FIST®) the HydraSim® provides visual bleeding simulation AND the auditory impact simulation associated with the point of wounding during a traumatic event. These simple yet powerful additions increase the realism to any medical training event.

*SPECIAL ORDER PRODUCT*
This item is not held in stock at the Tacmed warehouse.
Estimated delivery of this item is normally 6-8 Weeks.
Special Order Products are subject to a re-stocking fee if returned or cancelled. For further information, please call us on 1300 862 633.

The HydraSim® SP (Single Port) System meets the high demand for ultra-realistic hemorrhage simulation during tactical medical training scenarios while providing a cost effective solution to meet any training budget.  The HydraSim® SP combines the rugged durability of the original HydraSim® with a single, wirelessly operated, hemorrhage simulation output port.  The HydraSim® SP is easy to conceal and is designed to fit in virtually any back pack or underneath clothing.  The HydraSim SP allows the user to create their own simulated injuries and bring new life to old training mannequins and moulage kits.

*SPECIAL ORDER PRODUCT*
This item is not held in stock at the Tacmed warehouse.
Estimated delivery of this item is normally 6-8 Weeks.
Special Order Products are subject to a re-stocking fee if returned or cancelled. For further information, please call us on 1300 862 633.

Skedco’s DropLeg bleeding simulator provides intense wirelessly detonated hemorrhage simulation, yet doubles as a functional DropLeg first aid kit.  The front portion of the simulator allows caregivers to work out of the kit, while the back portion contains Skedco’s patented bleeding simulation technology.  Skedco’s DropLeg bleeding simulator provides one wound with arterial or venous blood flow and nearly 2 liters of blood pumping intensity, all while appearing as a first aid kit.