Trauma Trainers

Luna's TrueClot Wound Packing Task Trainers are an excellent way to provide realistic low-cost and repetitive training in wound packing and the use of advanced hemostatic gauzes (such as QuikClot). The task trainers have very realistic outer anatomy and wound beds with hidden bleed points. Two different wound beds are available: a laceration(stab wound) and a large calibre gunshot wound (GSW). The GSW contains a bony landmark that allows instruction to pack to the bone.

The task trainers are made from sturdy silicone, require no batteries or external power, have no moving parts and can be used over and over again. A reinforced tubing mount prevents pullout of the tubing. A one-way valve ensures that the TrueClot Blood Simulant does not back flow into the 1-litre squeeze bottle during use. TrueClot Blood Simulant will wash easily from the trainer with water even if the blood simulant has dried.

All TrueClot Wound Packing Task Trainers come with:

• A packet of TrueClot Blood Simulant Concentrate
• 10 packs of TrueClot Simulated Hemostatic Gauze
• 1L Blood Squeeze Bottle
• Wound Packing Trainer

The TrueClot? Packing, Compression, and Tourniquet Task Trainer (PCT3) is a low cost, durable bleeding control training aid. The simulated leg is ideal for introducing and reinforcing techniques including wound packing, compression bandages, and tourniquet application for hemorrhage control. It can be used as a dry trainer or moulaged with blood simulant for a realistic training experience.

Features:

• Dry or wet wound packing training, cleans up with water
• Fully wrap packed wounds with compression bandages
• Gunshot wound and laceration injury models with boney landmark
• Upper thigh area located 2?? ?? 3?? above wound models allows for proper tourniquet placement
• Anatomical knee landmark illustrates improper tourniquet placement over a joint
• Durable, stain resistant silicone construction

The Wound Cube by Phokus Research has four realistic wound patterns designed into a semi-transparent cube. The Wound Cube was designed to increase muscle memory for students learning the basics of bleeding control. Their design allows for more effective training in any classroom setting and without any mess.

Features:

• Dry training device - master the basics (no mess)
• Semi-transparent
• 3x Gunshot Wounds - Narrow, Small, Large
• 1x Large Laceration
• Realistic Tissue Loss
• Realistic Tissue Density
• Compact Design (No wasted space)
• Durably built
• Affordable
• Narrow Wound doubles as a Flashlight Channel for increased transparency
• Blood simulant?can be used with this product for added realism and can be purchased here.

The TrueClot Basic Packing Trainer (BPT) is a low cost, introductory level dry wound packing task trainer for the 'crawl' stage of training. Students can repeatedly practice correct wound packing techniques and develop muscle memory to hone their bleeding control skills. Constructed from durable silicone, the simulated gunshot exit wound can be packed with 12 feet of gauze and heavy external pressure can also be applied. The small form factor is ideal for table top classroom use, Stop The Bleed courses and in-service training. The BPT stows easily in the included storage can.

Features:

• No mess, dry wound trainer for teaching wound packing techniques
• Large caliber gunshot exit wound
• Can also be used as a wet trainer with TrueClot simulated blood for more realistic packing
• Small form factor for table top use and easy storage
• Durable silicone construction
• Includes one pack of compression gauze and storage can

*SPECIAL ORDER PRODUCT*
Estimated delivery of this item?is normally 2-4 Weeks.
Special Order Products are subject to a re-stocking fee if returned or cancelled. For further information, please call us on 1300 862 633.

The TraumaSim Emergency Tourniquet Trainer is an Australian made silicone wound and bleeding artery simulator used to increase realism and improve tourniquet application.

The simulated above knee amputation or upper arm amputation, provides realistic arterial bleeding from the wound. Bleeding is stopped when the correct tourniquet?pressure is applied. The?amputated wound end can also be used to demonstrate and practice stump dressing technique.

'Light' skin tone is supplied as standard, with a khaki green sleeve, however a range of skin tones and alternate sleeve colours are available on request.

Features:

• Simulated Leg or Arm with amputation
• Silicone skin and urethane bone
• Rugged construction for field use
• 2 & 4 limb sets come packed in a rigid plastic trunk (Plastic Trunk not included for single limb)
• Made in Australia

Includes:

• All tubing and fittings required
• 5-litre manual pressure pump
• PVC sheet for table protection
• Bench Clamps

Dimensions:

• 55 x 55 x 31 cm

NOTE: Custom orders or products not in stock are approx 4 weeks lead time.?

Proper tourniquet placement and application are crucial to effective hemorrhage control.??The TrueClot^??Tourniquet Application Trainer is a wearable device that allows full application of a tourniquet for training purposes. Training blood can be pumped through the device to simulate hemorrhage and when a tourniquet is properly applied bleeding is stopped. The padded arm cuff reduces pinching and pain and allows for proper application of a tourniquet during classroom or scenario training.? The trainer can be worn under a uniform or large t-shirt.

Tourniquet Application Trainer features:

• Durable ballistic nylon construction
• Easy to clean and air dry
• Apply tourniquet high and tight or 2?? ?? 3?? above the wound
• Heavy duty padding to reduce pinching and pain
• Bleeding wound with simulated vessel

The Tourniquet Application Trainer comes with a 1 Litre squeeze bottle for training blood, a quick disconnect fitting and a plastic storage case.? The trainer is for left arm fitment only.

TraumaSims task trainers allow students to train repeatedly in wound packing and haemostatic dressing techniques via a sturdy, realistic silicone base with tubing for bleeding capability. This is a Laceration Wound with the blood source controlled via a syringe. It is low-cost but critical training aid for any professional delivering life saving first aid training. 

These simple trainers are quick to refresh and refill allowing for repetitive training or cycling through large groups easily.

Available in both laceration and gunshot versions so you can get the trainer you need for your training requirements.

Proper junctional wound packing is a critical bleeding control skill. The TrueClot Inguinal Packing Trainer is a wearable training aid that simulates a junctional hemorrhage that cannot be treated with a tourniquet and teaches advanced wound packing skills. The trainer can be placed on a manikin or worn by an actor for a higher level of realism.

Training blood is pumped through the device to simulate hemorrhage and the large gunshot wound cavity can be packed with a full 12ft. x 3in. strip of simulated hemostatic dressing. Proper wound packing and compression will cause hemorrhaging to stop. When fitted on a manikin a junctional tourniquet may also be applied.

The trainer can be worn under or on top of clothing. For the highest level of realism use TrueClot Blood Simulant and Simulated Hemostatic Gauze for realistic blood clotting simulation. The trainer is for right side inguinal area fitment only.

The TraumaSim Haemostatic Clotting Trainers allows users to pack realistic bleeding wounds to practice the vital skill of haemostatic dressing application. Life-cast silicone skin looks and feels real adding realism to improve trainee skill and confidence. These units have ability for simulated blood flowing from the wound using a pump bottle via tubing.?

This Laceration model much closer simulates the shape and feel of a real limb and/or tissue, making it more realistic when used in training simulations, yet is can still be used on a bench for repetitive packing training.

Chest seal application is a critical bleeding control intervention. The TrueClot^® Chest Seal Application Trainer is a task trainer designed to teach this critical skill in both table top/classroom and wearable/scenario settings.

As a table top trainer, the simulated entry and exit wounds will bleed and bubble mimicking tension pneumothorax indications.  A real chest seal is applied to the trainer so students can practice with the seal they use in the field while learning proper placement techniques.  The wound trainer actively bleeds and simulates both exhalation and inhalation demonstrating the sealing and venting action of various chest seal products.   TrueClot’s proprietary design and materials allow chest seals to be removed and reused multiple times to reduce training costs.

When students are ready for scenario training, the same table top wounds can be adhered to and worn on the included Velcro MOLLE vest.  Students are taught to manage a moving patient while applying chest seals using skills learned during table top training.  The unique design allows instructors to place entry and exit wounds in various locations on the torso.  The Chest Seal Application Trainer includes a reservoir for simulated blood, tubing and a bulb pump for active bleeding simulation during wearable, scenario training.  The reservoir/pump system is stored inside the vest and tubing is secured inside the MOLLE loop to prevent tangles and increase realism.

Chest Seal Application Trainer features:

• Durable simulated wounds and Velcro MOLLE vest
• Easy to clean and air dry
• Apply and reuse real chest seals for realistic training
• Simulated bubbling, breathing and chest seal venting/sealing
• Wearable entry and exit wounds with active bleeding for scenarios

The Chest Seal Application Trainer comes with entry and exit wound models, a squeeze bottle for table top training, Velcro MOLLE vest, simulated blood reservoir, bulb pump and tubing with quick connectors for wearable/scenario training.

TrueClot Chest Seal Application Trainer (item # 5214) – Dark or Light flesh tones available

All TrueClot task trainers are latex-free.